Custom DTF Transfers by Size
Build online in our editorPrinted in all 7 shops · Ships from the USA
One continuous 22-inch-wide film sheet with your designs nested on it - you cut them apart and press them.
- No minimum No minimum
- No art fees No art fees
- Same rate Same rate
- Cotton and poly Cotton and poly
Ready in 2 hours
How to use it
Cut, place, press, peel
You receive film, not a finished garment. Four steps, using the press settings we publish.
-
Cut
Cut the designs apart. The sheet is one continuous 22-inch film - nothing arrives pre-cut.
-
Place
Pre-press the garment 3–5 seconds to dry it. Lay the transfer face-down. Do not apply over a sublimation print.
-
Press
310°F / 155°C, medium pressure, 12–15 seconds. That is the setting we publish on the pressing guide.
-
Peel
Wait about 5 seconds. Peel in one motion, hot or cool. Re-press 5–10 seconds through parchment.
310°F / 155°C 12–15 seconds Medium pressure
What you receive
In the box
One surprise sticker Usage guide
-
22 inches wide
One PET film sheet. Length is the size you picked - 12 to 300 inches.
-
Nested, not pre-cut
Many designs on one continuous sheet. You cut them apart.
-
Powder already cured
Hot-melt powder is on the film. Ready to press at 310°F / 155°C.
-
No garment included
Blank shirts are not in the box. Extra designs stay on the sheet until you need them.
Where it goes
Cotton, polyester, and blends
-
Yes
100% cotton, Polyester, Cotton / poly blends, Fleece and sweatshirt fabric.
-
Ask first
Nylon - ask us before you press. Heat-sensitive polyester too.
-
Not this
Not for sublimation-printed items.
-
Press
310°F / 155°C, 12–15 seconds, medium pressure on cotton.
- Width
- 22 in
- Lengths
- 12–300 in
- Film
- PET film with hot-melt powder
- Ink
- DTF ink, white underbase
- Finish
- Ready to heat-press